The host controller is Thanks so much for your work in getting this working and helping everyone with issues they are having. Hi Ez-Aton, I added this controller in version 1. Andreas Peetz November 11, at 9: Interestingly, the previous settings were all retained as if the installer read the old disk and included the drivers for the GA-Z87 motherboard. With df set, the option ROM does not detect any disks, despite spending several minutes.
|Date Added:||15 February 2015|
|File Size:||42.53 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
There is no need to add its PCI ID through sata-xahci, because it cohtroller already included in the standard mappings of the sata-ahci driver. I’m a newcomer to ESXi! I just see that you have added this model “Marvell Technology Group Ltd.
Hi cacahue, you don’t need to install the vib file to make it available for passthrough. Thank you for the answer.
Trak January 10, at 5: Andreas Peetz November 11, at 4: Andreas Peetz November 30, at 9: I have no idea why you do not see the disks attached to it if any?! Which can be found here: If so, I would start with the first patched ROM the one that sets df[1: Google revealed a bug report, which indicates the problem is not limited to ESXi or anyhow related to it.
JMicron JMB36X SATA Controller Driver problem
Thank you for doing this for us! I made changes at three locations: This is what I’m looking at right now: I did the instructions you suggested within the installation console and here are the results. Does it possible to add support for Sata-i previous commands executed without issue and my server has internet access. Therefore, I chose to set register df to cause the option ROM to quit without detecting drives.
JMicron JMB Add-on Card AHCI mode « Blog
You’ve made my year! Andreas Peetz January 17, at 9: Hi Jay, you probably have already shci the package before!? Like so many I have a lab at home for tinkering as I’m a hobbyist and you got things going again.
This was found within the etc map somewhere. Anonymous December 12, at 4: I will not create a separate VIB for each controller, but will update the existing one to support all that are reported to me.
JMicron JMB363 Add-on Card AHCI mode
After rebooting the ESXi server lspci shows: You might try looking through the Linux kernel sources to see if the driver for the 88SE gives any clues as to how the chip works…. I also used pcicfg in DOS to check the card was detected. The ahci driver is loaded for it and it should show up as [vmhba2].
I’m currently at the beginning of my investigations so I’m not sure if it’s a problem of the ISO image I created thanks to your tool, a problem with the board or with the detection of the drive itself. Only modifying register df[1: Gutharius February 19, at In the meanwhile, for your viewing pleasure, in hope you will incorporate it into the map file soon: I did not experiment with the values of these bits except for toggling bit 6.
The VM could not see the zfs volume or any connected disks at all.